Aluminum Sheet for Fuel Tank Body
2023-01-18 16:00:57
5454-H111 aluminum sheet/Plate is a typical rust-proof aluminum. Its strength is about the same as that of 5154, about 20% greater than that of 5052 aluminum. It can adapt to harsh corrosive environments and is is widely used in the fields of automobiles and aluminum tankers.
5454-H111 aluminum sheet/Plate is very suitable for the manufacture of fuel and oil tank'body. The commonly used thickness of 5, 6, 7, 8mm, width is less than 2.2 meters, the length is generally within 12.5 meters.
Specification of 5454-H111 aluminum sheet/Plate
Chemical composition
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Standard |
5454 | 0.25 | 0.40 | 0.10 | 0.50-1.0 | 2.4-3.0 | 0.05-0.20 | 0.25 | 0.20 | EN573(WT%) |
Mechanical performance
Alloy | Temper | Yield Strength Rp0.2(Mpa) | Tensile Strength Rm(Mpa) | Elongation A50(50%) |
5454 | H32 | ≥250 | ≥180 | ≥8 |
Size
Alloy | Temper | Thickness | Width | Length |
5454 | F, O, H12, H14, H16, H18,H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114, H116, H321 | 0.3-600 | 20-2650 | 500-16000 |
Advantages of 5454-H111 aluminum sheet/Plate
1. Since 5454 aluminum sheet has less hard and brittle compounds, and it is not easy to produce processing cracks.
2. It has has strong plasticity and low welding twill tendency.
3. 5454 aluminum sheet has good corrosion resistance and high tensile strength. Aluminum alloy has incomparable corrosion resistance than steel.
4. The tank made of 5454 aluminum alloy can transport various liquids or liquefied gases without any protective layer inside.
5. The aluminum Fuel Tank'Body has good conductivity and energy absorption performance. It will not generate sparks when it collides with other vehicles, thus reducing the occurrence of accidents such as explosions.