Aluminum drilling entry
2019-08-06 10:14:35
Aluminum sheet for PCB Material | |||||
Alloy | Temper | Specification(mm) | |||
Thickness | Width | Length | Remarks | ||
1100 | H18 | 0.14-0.18 | 1244 | 1092 1041 | Produce various specifications according to customers¡¯ requirements |
| 1220 | 1067 1016 914 | ||||
TECHNICAL DATA SHEET
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Other Al | Al | |
| each | total | |||||||||||
1100 | Si +Fe:0.95 | 0.05-0.20 | 0.2 | - | - | - | 0.1 | - | 0.05 | 0.15 | 99.0 | |
MECHANICAL PROPERTY
Alloy | Temper | Thickness(mm) | U.T.S(Mpa) | Elongation(%) |
1100 | H18 | 0.14-0.18 | 170-190 | >=2 |
TOLERANCE
Thickness(mm) | Width(mm) | Length(mm) | Diagonal(mm) |
+-0.005mm | +1 -0 | +1 -0 | <=2 |